2,550+5.0 on TrustATrader 0151 321 0498Call Paul today
Call 0151 321 0498Mobile 07932 718362

Paul’s speciality

uPVC door & window lock repairs

Specialist uPVC door lock repairs and replacements, multipoint lock replacement, alignment work and anti-snap upgrades across Liverpool and the North West.

What’s your door doing?

Mon–Fri 9am–5pm · Weekends by appointmentCovering Liverpool & surrounding areas

Multipoint mechanisms

Failed mechanism? We’ve got it covered.

A worn multipoint mechanism is one of the commonest reasons a uPVC door stops locking, and it rarely fixes itself. If the gearbox has split, the hooks aren’t travelling or the handle has gone limp, leaving it puts your home at risk.

Paul has been diagnosing and repairing uPVC faults across Liverpool, Warrington, St Helens, Wigan, Widnes and Formby since 2000. In most cases the fault is fixed in a single visit.

Call Paul about it
uPVC door multipoint lock mechanism with centre gearbox, hook locks and rollers along the strip
Fig. 1A uPVC multipoint lock: the gearbox sits in the centre, with hook locks and rollers along the strip.

Fault finder

What’s gone wrong with your uPVC door or window?

Find your fault, what it usually means and how Paul fixes it. Where a part has worn out, Paul will tell you and replace only what is needed.

Select your fault

01 / 07Select a fault to see the repair

Door won’t lock

How Paul fixes it

uPVC door lock repairs

The key won’t turn, the lock won’t catch or the door won’t lock at all. Paul finds the worn part, whether that’s the cylinder, the gearbox or the keeps, and fixes or replaces just that.

Door won’t lock: the full guide
Screwdriver at a uPVC door lock with keys in the cylinder
02 / 07Select a fault to see the repair

Handle limp or won’t lift

Don’t force it: a stuck mechanism can leave the door unlocked or jammed shut.

How Paul fixes it

Gearbox, handle and hook bolt repairs

A limp handle, or one that won’t lift, usually points to the gearbox. Hook bolts and roller cams wear too. Paul carries the common parts, so most repairs are finished in one visit.

uPVC gearbox replacement
Screwdriver removing a lever handle from a uPVC door lock
03 / 07Select a fault to see the repair

Key won’t turn, lock jammed

How Paul fixes it

Lock and cylinder repairs

Paul frees the mechanism, adjusts the door or the keeps so the bolts engage cleanly, and replaces the cylinder if it has worn.

Euro cylinder lock with a set of keys
04 / 07Select a fault to see the repair

Door hard to close

uPVC frames expand and contract with the temperature, so a door that locked fine in summer can jam in winter.

How Paul fixes it

Cold-weather and alignment faults

Paul adjusts the hinges, keeps and strike plates to restore smooth operation, which also stops the strain wearing out the lock.

Lever handle on a white uPVC front door
05 / 07Select a fault to see the repair

Multipoint lock failed

How Paul fixes it

Multipoint lock replacement

When you lift the handle, hooks, rollers and bolts should engage cleanly in the frame. If that sequence fails, Paul repairs or replaces the faulty mechanism, not the whole door.

Multipoint lock replacement
Multipoint locking mechanism for a uPVC door, with hook bolts and rollers
06 / 07Select a fault to see the repair

Window lock not working

How Paul fixes it

uPVC window lock and handle repairs

Espagnolette window locks, friction stays and handles wear like door hardware. Paul repairs or replaces them to suit the window.

Screwdriver fitting a white uPVC window handle
07 / 07Select a fault to see the repair

Cylinder needs upgrading

How Paul fixes it

Anti-snap cylinder upgrade

A TS007 3-star cylinder is rated against that attack and usually fits your existing door. Read about the upgrade.

Anti-snap cylinder fitted in a uPVC door with a lever handle
Anti-snap Euro cylinder, three-quarter view

Security upgrade

Anti-snap cylinder upgrades

Standard Euro cylinders can be snapped, a method used in many forced entries. Paul fits TS007 3-star anti-snap cylinders, the rating for cylinders tested against snapping, picking, bumping and drilling.

  • Fitted to your existing uPVC door, usually without any other changes
  • Still operates from the inside if the outside is attacked
  • Can be done as part of a lock repair
ABS 3 Star cylinders

Why Paul

Why call Paul for uPVC lock repairs

Qualified
NCFE-certified, Keytek-accredited and a member of the National Guild of Certified Locksmiths.
Specialist
Paul has worked on uPVC doors and windows across the North West since 2000.
Parts
Mechanisms, hook bolts, cylinders and handles for the common faults are carried on the van.
Honest
Paul finds the part that has failed and replaces only what is needed.

Backed by 2,550+ five-star reviews. See the accreditations and awards.

Areas covered

uPVC lock repairs across the North West

From a base in West Derby, Paul covers Liverpool and about 30 miles around it. Not sure whether you’re covered? Call and ask.

Call about your area

Liverpool

Anfield, Aigburth, Allerton, Belle Vale, Childwall, Croxteth, Dingle, Everton, Fazakerley, Garston, Wavertree, West Derby

Sefton & West Lancs

Bootle, Crosby, Formby, Southport, Ormskirk, Skelmersdale

Wirral, Halton & St Helens

The Wirral, Widnes, St Helens, Newton-le-Willows

Warrington, Wigan & Leigh

Warrington, Wigan, Leigh

Call Paul about your uPVC door or window

A stiff handle or a lock that won’t fully engage is a weak point, not just an annoyance. Describe the fault and Paul will tell you what he thinks is wrong and what the repair involves.

Follow Paul
Call PauluPVC repairs